The patterns on the tree, as their nature creates in our industry produces a lot of time covering that simulates the texture of wood. Of course, this achievement, which allows to preserve the forest and improve productivity in the furniture industry and interior design. But no matter how hard the artists, it is only imitation of natural materials. Stunning designs in wood, woven nature, irreplaceable. Let's see how they are formed. The bottom line is that the growth of annual rings of wood are obtained is not direct, like a folded paper roll, the fibers svilivayutsya, sometimes in different directions and at different sections under the bevels intersect to form patterns. Clearly trace the this process in three main sections of the trunk: the transverse (end), the radial and tangential. Transverse (front) cut the tree trunk is made up of annual layers.
On pine, cedar, larch and others clearly seen ring, and with careful handling you can get a nice texture. Radial incision passes longitudinally through the core of the trunk, the texture on the planes formed as a relatively straight longitudinal lines. Tangential incision runs along the trunk, but removed from the core. It formed the patterns are cut as tree rings, covers and medullary rays, which serve for the passage of moisture, air and nutrients, horizontally inside the trunk from the core to the crust. On the planes of the square timber with a core in the center and cut down all slab sections tangential to the patterned structure. Next, cut the timber vertically into two equal parts. Radial incision will be at the center of the core, and the planes will be texture with straight stripes. In the remaining three planes will remain tangential texture, but the narrow plane figure is divided in half. If sawn timber as this into four equal parts by heart, you will receive four beams, and on each of the two sides will be a radial pattern, as opposed to tangential.