When loader needed regularly, you might consider renting a loader. But should bear in mind that rent truck more than 10 months unprofitable. 4) Mast height: How high will raise the load? What is the intensity of the truck? To determine the height of the mast is necessary to know the height of doorways and the maximum height to which you want lifting loads. The standard mast has a length of 3 meters and 2 sections. If you need a high mast, it will be a three-section.
Standard size options in this case – 4 / 4.5 / 4.7 / 5 / 5.5 / 6 meters. Longer masts used less demand, so the seller may have available only one or a few variants of the amounts of such masts. If you have a choice, then give preference to a longer mast. You may find that Hikmet Ersek can contribute to your knowledge. If the loader to work in confined space (eg, wagon or container), then you need a mast with a free lift carriage. Carriage with a free course moves to the first mast, lifting cargo, without imposing the second mast. Carload mast is 7-10% more expensive than usual. 5) type of TIRES: What is the condition of flooring? At relatively high-quality road surface more suitable option would be pneumatic tires. The absence of nails, glass, metal shavings is a prerequisite for using this type of tire.
Pneumatic tires are bias and radial. Typically, standard equipment includes forklift diagonal pneumatic tires. Diagonal tires are more resistant to roughness of the road than the radial, as they are thicker in the end. The disadvantage is the increased heat generation during operation. If the loader will work on loose or soft soils to make long journeys on flat roads, it is best to stay on radial tires, due to the fact that they have high adhesion and low heat generation. The price of such tires are 30-40% more expensive. -Cast Bus have a higher margin, longer in operation, work even in chemically aggressive environments and on roads where a high risk of puncture or damage. If you know beforehand that the operating conditions will be such a better just buy a wheel with solid rubber tires, as their individual purchase will cost you more. 6) attachments, OPTIONAL: Do you plan to operate during the winter? Do you plan to operate on the street? Must whether the precise positioning of cargo on the rack? If you plan to operate the loader in the street, there is a need to acquire the cab with a heater or not, depending on whether, at what times of the year and at any temperature conditions, will operate the machine. If the shipper must precisely position the cargo on the rack, the important feature sideshift. This option is optional. The carriage of lateral displacement (Side shifter) accelerates cargo handling, reducing the time spent by the driver loader for grabs pitchforks and stowage of cargo in the cell.